Products

  • Hot dip galvanized embedded parts

    Hot dip galvanized embedded parts

    Hot dip galvanized embedded parts (prefabricated embedded parts) are components that are pre-installed (buried) in concealed works. They are components and fittings that are placed during structural casting and are used for overlapping when laying superstructure.
  • Stainless steel bolts

    Stainless steel bolts

    Stainless steel bolts refer to bolts made of stainless steel, including stainless steel SUS201 bolts, stainless steel SUS304 bolts, stainless steel SUS316 bolts, and stainless steel SUS316L bolts.
  • Cylindrical head welding nail

    Cylindrical head welding nail

    Welding nails belong to fasteners with high strength and rigidity. Welding nails are short for cylindrical head welding nails for arc stud welding. The welding nails are of nominal diameter Ф 10 ~ Ф 25 mm and total length before welding is 40 ~ 300 mm. Solder studs have a manufacturer's identification mark made of convex characters on the top surface of the head. Solder studs are widely used.
  • Hot dip galvanized hexagon socket head bolt

    Hot dip galvanized hexagon socket head bolt

    The outer edge of the screw head of the hexagon socket head bolt is round, and the middle is concave hexagonal, while the hexagonal bolt is the one with more common screw heads with hexagonal edges. After hot galvanizing surface treatment, anti-corrosion effect is achieved.
  • Large hexagon bolt of steel structure

    Large hexagon bolt of steel structure

    Steel structure bolt is a kind of high-strength bolt and a kind of standard part. Steel structure bolts are mainly used in steel structure engineering to connect connection points of steel structure plates. Large hexagonal high-strength bolts belong to the high-strength grade of common screws. The hexagonal head will be larger. The big six-angle structural bolt consists of a bolt, a nut and two washers. Generally 10.9.
  • Hot Galvanized External Hexagon Bolt

    Hot Galvanized External Hexagon Bolt

    There are many different names for the outer hexagonal bolt, for example, it can be called the outer hexagonal bolt, for example, it can be called the outer hexagonal bolt. It can also be called an outer hexagonal bolt. This all means the same thing. It's just that personal habits are different.
  • Steel brace

    Steel brace

    Steel brace is suitable for roof and wall beams of steel structure engineering. Straightening generally refers to round steel that ties steel purlins, i.e. coarse steel bars, to enhance the stability of purlins and make purlins less prone to instability and damage under certain external forces. There are diagonal braces (i.e. 45-degree bending at the screw thread) and straight braces (i.e. the whole is straight). After hot galvanizing treatment, antirust effect is achieved.
  • Stainless steel hex nuts

    Stainless steel hex nuts

    Stainless steel hex nuts are used in conjunction with bolts and screws to connect and fasten parts. Among them, Type 1 six-purpose nuts are the most widely used. Grade C nuts are used in machines, equipment or structures with rough surfaces and low precision requirements.
  • Drill tail wire

    Drill tail wire

    The tail of the drill tail nail is mostly in the shape of a drill tail or a sharp tail, which quickly occupies the market due to its simple use and easy operation. The drill tail nail can be used for drilling holes on various basic materials to realize quick splicing and assembly, has strong adhesive force, is not easy to loosen and fall off, is very simple and convenient to use, and has high safety factor.
  • The hot-dip galvanized nut

    The hot-dip galvanized nut

    The hot-dip galvanized nut is matched with the hot-dip galvanized bolt, that is, the reaming nut is subjected to hot-dip galvanized surface treatment. Because hot galvanizing is coated with zinc, reaming is necessary. Hot galvanizing is characterized by unsmooth surface but strong corrosion resistance. It is generally used outdoors and has 4.8, 8.8, 10.9 and 12.9 high strength grades.
  • Torsional shear bolt for steel structure

    Torsional shear bolt for steel structure

    Steel structure bolt is a kind of high-strength bolt and a kind of standard part. Steel structure bolts are mainly used in steel structure engineering to connect connection points of steel structure plates. Steel structure bolts are divided into torsional shear type high-strength bolts and large hexagonal high-strength bolts.
  • U-shaped hoop

    U-shaped hoop

    U-shaped hoop. A bolt commonly used in pipe installation to fix pipes. This bolt is shaped like a U-shape. Used to link two firmware. There are 4.8 and 6.8 grades, which have been treated by hot galvanizing to achieve anti-corrosion effect.
12 Next > >> Page 1 / 2